INSTALLATION
FLUSH LOUVERS
1)Install the top louver by sliding the two bracket clips into the brackets located underneath the top of the fi rebox.
2)Install the bottom louver by folding the louver down and then sliding the Bottom Louver bracket down onto the 2 pins on the base of the unit (Diagram1). Secure with 1 screw (Diagram 2).
Diagram 1 | Diagram 2 |
DOUBLE SCREEN
DOOR
1)Pull out the top louver.
2)Center the screen door and hook over the fl ush door.
Note: Top and bottom louvers are different.
3)Open the bottom louver. Pull the Burner ON/OFF control box from inside the bottom of the fi replace and position the slots in the bracket over the 2 screws on the left side of the bottom louver. Push down to lock into place. Tighten the screws.
3)Open the screen door(s) and secure the screen door to the fl ush door front with 2 clips on the bottom left and right side.
Clip locations
Clip installed on right side.
Note: If any maintenance etc. must be done in the firebox, first remove the Bay louvers and door.
OPTIONAL BAY TRIM
Attach the 4 supplied magnets, each to the back of the top and bottom trim pieces (space out evenly) and attach trim to the top and bot- tom of Bay door.
OPTIONAL BAY DOOR
The Bay louvers MUST be used
with the Bay glass option.
|
| The optional Bay door is an overlay on the | |
|
| flush front. The standard fl ush door and glass | |
Screws on | Burner ON/OFF | must remain on the unit. | |
| |||
louver bracket | 1) Hook the top of the bay door over the fl ush | ||
control box | |||
|
| door fl ange and swing the bottom against | |
|
| the bottom fl ange of the fl ush door. | |
|
| 2) Secure to the fl ush door bottom bracket with | |
|
| 2 screws provided. |
Burner ON/OFF control box attached to
bottom fl ush louver.
32 | Regency® |
