Regency P42-NG4 Rigid Pipe Venting, Horizontal or Vertical Terminations, 943 or 943S, Pipe Length

INSTALLATION

RIGID PIPE VENTING

Horizontal or Vertical Terminations

The Rigid Pipe Venting System offers a complete line of component parts for installation of both horizontal and vertical installations. Many items are offered in decorative black, as well as galvanized fi nish. We recommend using the galvanized fi nish for installation with the P42.

The minimum components required for a basic horizontal termination are:

1Horizontal Termination Cap

190o Elbow

1Flue Adaptor

1Wall Thimble

1Length of pipe to suit wall thickness (see chart)

Vertical

Terminal

Storm Collar

Part # 953

Flashing

943 or 943S

Wall thickness is measured from the back standoffs to the inside mounting surface of termination cap. For siding other than vinyl furring strips may be used, instead of the vinyl siding standoff, to create a level surface to mount the vent terminal. The Terminal must not be recessed into siding. Measure the wall thickness including furring strips.

If a Vinyl Siding Standoff is required (it must be used with vinyl siding), measure to outside surface of wall without siding and add 2 inches.

Vinyl Siding

Standoff (Optional)

Part #950

Alternate

Horizontal

Termination Caps

WARNING:

Ceiling Firestop	Horizontal
(Part # 963)	Termination
	Cap
	Wall Thimble
Pipe Length	Part # 942
	Adj.Pipe Length
	11" - 14-5/8"
	90o Elbow

Do not combine venting components from different venting systems.

However use of the the AstroCapTM and FPI Riser is acceptable with all systems.

This product has been evaluated by Intertek for using a Rigid Pipe Adaptor in conjunction with Duravent Direct-Vent GS, Selkirk Direct-Temp, Ameri Vent Direct venting and Security Secure Vent systems. Use of these systems with the Rigid Pipe adaptor is deemed acceptable and does not affect the Intertek WHI listing of components.

24" Pipe

Length

Rigid Pipe Adaptor

(Part# 510-994)

When using Rigid Vent other than

Simpson Dura-Vent, 3 screws must be used to secure rigid pipe to adaptor.

Flat Wall Installation

Wall Thickness			Vent Length
	(inches)		Required (inches)
4"	-	5-1/2"	6"
7" - 8-1/2"			9"
10"	-	11-1/2"	12"
9"	-	14-1/2"	11" - 14-5/8" Adj. Pipe
15"	-	23-1/2"	17" - 24" Adj. Pipe

Corner Installation

Wall Thickness			Vent Length
(inches)			Required (inches)
3-1/4"	-	6-3/4"11"	- 14-5/8" Adj. Pipe
7-3/4" - 16-1/4"			17" - 24" Adj. Pipe
7-1/4"	-	8-3/4"	6" + 12"
			9" + 9"
4-1/4"	-	5-3/4"	6" + 9"

The FPI AstroCapTM and FPI Riser Vent terminal are certifi ed for installations using FPI venting systems as well as Simpson Dura-Vent®Direct Vent GS, American Metal Products Ameri Vent Direct Vent, Security Secure Vent®, Selkirk Direct-Temp. AstroCapTM is a proprietary trademark of FPI Fireplace Products International Ltd. Dura-Vent® and Direct Vent GS are registered and/or proprietary trademarks of Simpson Dura-Vent Co. Inc.

14 Regency® P42-4 Zero Clearance Direct Vent Gas Fireplace