Regency P42-LP4, P42-NG4 Vertical Termination With Co-Linearflex System, Required Parts

INSTALLATION

VERTICAL TERMINATION

WITH CO-LINEAR FLEX SYSTEM

THE APPLIANCE MUST NOT BE CONNECTED TO A CHIMNEY FLUE SERVING A SEPARATE SOLID FUEL BURNING APPLIANCE.

This appliance is designed to be attached to two 3" (76mm) co-linear aluminium fl ex running the full length of the chimney. See the Venting Arrangements on next page for minimum and maximum heights.

Required Parts:

Part #	Description
946-529	Co-linear DV Vertical
	Termination Cap
948-305	3" Flex - 35 ft.
946-563	Co-Axial to Co-Linear Adapter Kit
	which contains the following:
	Co-linear Flex Adapter
	Outer Pipe
	Inner Pipe Adapter
510-994	Rigid Pipe Adaptor

Alternate Approved Caps

980Vertical Termination Cap

991High Wind Cap

923GK 3" Co-linear Adapter with fl ashing

FPI Cabinet and/or Flat Wall Mantles may be used in these applications ensuring that clearances to combustibles are maintained.

Masonry chimneys may take various contours which the fl exible liner will accommodate. However, keep the flexible liner as straight as possible, avoid unnecessary bending.

The Air Intake pipe must be attached to the inlet air collar of the termination cap.

Co-linear DV

Vertical Termination

Cap # 946-529

Amaximum of two certified

joiner kits
may be used
per length.	Flex Liner
#948-305 (35 ft)

Exhaust

Flue

Outer
Pipe
with Kit#
946-563
		Air Intake
Pipe Length		Co-Linear
		Flex
		Adapter
Rigid Pipe Adapter		with Kit#
		946-563
# 510-994	90 Degree
	Elbow	Inner Pipe
		Adapter
		with Kit#
		946-563

Regency® P42-4 Zero Clearance Direct Vent Gas Fireplace 19