Ricoh 340 manual 154

4

USER TOOLS (COPY FEATURES)

1. General Features 4/
	4
Menu	Description
13. Initial Mode Set	You can select the initial mode or Program No. 10 as the
	mode to be effective when modes are cleared.

Note

❒Default: Initial

14. Management Setting

You can change settings for user access limitation copier functions.

Counter Reset	You can check the number of copies made under each user
	code. You can also reset each user code's counter to 0.
	Note
	❒ If more than one user code is registered, you can view all
	the counters using the [−Prev.] or [↓Next] key.
ClearCode/Counter	You can delete all user codes or reset all counters to 0.
Reg. User Code	You can register user codes.

Note

❒Up to 50 user codes (8 digits or less) can be registered.

Chg/Del User Code You can change or delete user codes.

Note

❒The number of copies made under the old code is added to that made under the new user code.

❒The number of copies made under the deleted code is also deleted.

CounterList Print You can print a list of counters shown by user code.

Note

❒To stop the printing, press the [Cancel] key.

154