Ricoh 340 manual Make sure that on is selected, Then, press the OK key

	COPYING
	Metric version	A3LB4LA4KL	Limitation
		B5KLA5L	❒ The optional 3000-sheet finisher
	Inch version	11" × 17" L, 81/2" ×	and punch kit are required to
		14" L, 11" × 81/2"	use this function (Type 3 only).
		KL, 51/2" × 81/2"	❒ You cannot make punch holes
		L	with Rotate Stack.
			Note
2	❒ The paper sizes that can be used in
			❒ If you do not wish to make
	the Rotate Stack function are as fol-
	lows:		punch holes, go to Step D.
			C Make sure that [ON] is selected.
	Metric version	A4KL, B5KL
			Then, press the [OK] key.
	Inch version	81/2" × 11"KL

❒To use the Rotate Stack function,

two paper trays identical in size and different in direction (KL) are required.

Reference

For the maximum tray capacity of the optional finisher, see Þ P.49 “Staple”.

A Press the {Sorter} key until the

Stack indicator (bottom) is lit.

2
1 1	2
	2
2	2	123
Enhanced
		ND2L0101

B To make punch holes, press the [Punch] key.

ND2C0104

D Enter the number of copies with the {Number} keys.

E Set your originals.

When setting a stack of originals in the document feeder

A Set a stack of originals in the document feeder, then press the {Start} key.

After all the originals are scanned, the copies are deliv- ered to the tray.

Note

❒The last page should be on the bottom.

ND2C0101

48