Other Functions, Energy Saver Mode-Saving Energy | Ricoh 340

The key indicator goes off.

The key indicator lights.

OTHER FUNCTIONS

OTHER FUNCTIONS

Energy Saver Mode—Saving Energy

If you do not operate the machine for a certain period after copying, or when you press and hold the {Clear Modes/Energy Saver} key for more than one second, the display disappears and the machine enters Energy Saver mode. When you press the {Clear Modes/Energy Saver} key again, when the originals are set in the document feeder, or when the platen cover or document feeder is opened, the ma- chine returns to the ready condition. In Energy Saver mode, the machine uses less electricity.

The Energy Saver mode makes a two- step reduction in electricity: one for the period up to the time set for Low Power mode, the other for the period after that time.

Note

❒The period for which the machine remains in Energy Saver mode (i.e. the period until the mode is turned off to return to the ready condi- tion) varies with the effectiveness of energy saving.

❒If you press the {Clear Modes/Energy Saver} key during the operation, the current settings will be cleared.

Reference

See “8. Low Power Timer” of the System Settings.

Interrupt—Temporarily

Stopping One Job To Copy

Something Else

2

You can make urgently needed copies during a multi-copy run.

A Press the {Interrupt} key.

B Remove the originals currently set for copying, and set your orig- inals for interrupt copying. Make your copies.

C After interrupt copying, remove the originals for interrupt copy- ing and the copies.

D Press the {Interrupt} key again.

E Reset the previous originals. Then, press the {Start} key.

Note

❒The previous copy settings are recalled and the previous copy

job can be resumed by pressing the {Start} key.

User Codes

If the machine is set to use the User Code function, operators must input their user codes before the machine can be operated. The machine keeps count of the number of copies made under each user code.

Note

❒When the machine is set for user codes, the machine will prompt

63

Image 79

Ricoh 340 manual Other Functions, Energy Saver Mode-Saving Energy, User Codes

Contents

340/350/450 Following label is attached on the back side of the machine Safety During Operation Safety InformationExamples Of Indications Page Iii Page Page Symbols HOW to Read this Manual Vii Viii What YOU can do with this Machine Copy Mode RR Rrrr Table of Contents Preset REDUCE/ENLARGE-REDUCING and Enlarging Using 113 102108 111 166 148150 165 Xiv Machine Types Guide to Components Paper tray Operation panelDuplex unit Unit for two-sided copiesoption for Type Front cover Lower right cover Bypass tray option for TypeVentilation hole Right side cover To copy onto A3, 11 × 17 paper Guide If the end of the sheet is curled Type Options Sheet finisher only for Type Type 2 and Type Function List Based on Options Page Page Operation Panel IndicatorsPanel display Keys Cursor keys Shortcut keys Displays items which can be selected or specified Panel DisplayDisplays And Key Operations Copy initial display Common keys Function menu display Sample Display for Erasing the Centre/Border Display Panel Layout Main power switch left side of the ma- chine Turning On The PowerPower switches Operation switch right side of the op- eration panel Er key Turning Off The PowerWhen the Clear Modes/Energy Saver indicator is lit Press the operation switch to make the On indicator go off Changing Modes Inch version Sizes And Weights Of Recommended OriginalsOriginals Metric version Sizes detectable by the Auto Paper Select Metric version Sizes Difficult To Detect Exposure glass Original Sizes And Scanning Area/Missing Image AreaDocument feeder Recommended Paper Sizes And Types Copy Paper Reference Non-recommended Paper Paper Storage Toner Storage TonerUsed Toner Basics Set your originals Basic ProcedureMake sure that the machine is Copy mode Make sure that there are no previ- ous settings remaining Auto Off Auto Reset Lower the platen cover or the doc- ument feeder Setting OriginalsSetting Originals On Exposure Glass Lift the platen cover or the docu Ment feeder Set the next original while Auto Feed indicator is lit Setting Originals Document FeederSetting a stack of originals in the document feeder When Sadf mode is selected Press the ↓Next key until DF Set- ting is displayed Using SADF, Mixed Sized, and Thin Paper modesSadf mode Press the Menu key Press the Exit key Mixed sizes modeSelect DF Setting with the keys, then press the Select key Press the Select key Thin paper mode Select Thin Paper with the keys, then press the Select key Basic Functions Adjusting Copy Image Density Combined Auto and Manual Image Density Key to cancel itEnhanced Image Copy Manual Image Density Selecting Original Type Setting Manual Paper Select Selecting Copy PaperSpecial Original Auto Paper Select Make sure that the Auto Auto Paper Select is selected Auto Paper SelectManual Paper Select Select the copy paper Select the paper tray by pressing the Paper or Machine Choose Reproduction Ratios Staple the optional 1000-sheet finish- er required SORT/STACK/STAPLESort Stack 144 y Removing Punch Waste Sort Rotate Sort Shift Sort Sort-Sorting Into Sets 123, 123 When setting a stack of originals in the document feeder Shift Stack optional finisher re- quired Stack-Stacking Together All Copies Of a Page 111, 222Rotate Stack Shift Stack Rotate Stack Make sure that on is selected Press the Sorter key until Stack indicator bottom is litThen, press the OK key Staple A4KL B5K B5KL Sheet finisher Stapling position and original setting Press the OK key Select one of four stapling posi- tions To clear scanned images of the originals When memory reaches 0 %To stop scanning To resume scanning Press the Start key Copying from the Bypass Tray Adjust the guides to copy paper size When copying onto non-standard size copy paper Press the ↓Next key until your desired size is displayed When copying onto standard size copy paperMake sure the k indicator is selected Press the # key Press the Ppr.Size key Press the # key Press the Ppr.Type key When copying onto OHP transparencies or thick paper Set your originals and press the Start key Deleting a Program PROGRAM-STORING Your Copy Settings in MemoryStoring Your Settings Storing Your Settings Deleting a Program Recalling a Program Energy Saver Mode-Saving Energy Other FunctionsUser Codes Original Beeper Auto Start-Entering Copy Job Settings During Warm-up Period Original → Copy paper Ratio % Size Press the Enlarge or Reduce key to select a ratio When using the Number keys When using the n or o keyZOOM-REDUCING and Enlarging in 1 % Steps Set your originals, then press the Start key Metric version Mm steps Inch version 99.9 Steps Copying Horizontal % Select the Direct. Mag. % key with or key. Then, press ND2C0104 Select Left left margin or Right right margin with the keys Margin ADJUSTMENT-ADJUSTING the MarginEnter the desired margin width with the Number keys ND2C0101 Centre Erase CENTRE/BORDER-ERASING the Centre and the BorderErase Centre Erase Border Press the Centre key CentreBorder Select the part to be erased Set your originals, then press the Start key Duplex unit COMBINE-COMBINING Originals Into ONE CopyPages→1-sided Pages→booklet COMBINE-COMBINING Originals Into ONE Copy Press the ↓Next key until the Combine is displayed Making a booklet Book → 1-Sided Feeder Without the optional documentWith the optional document feeder Select Series with the keys Sided OriginalsPress the ↓Next key until Series is displayed Sided → 2-sided DUPLEX-MAKING TWO-SIDED CopiesBook → 2-sided Top to Bottom Originals and copy direction Top Specifying Orientation of Bound Originals Original Copy paper When setting a stack of originals in the document feeder Adding a Front Cover COVER/PAPER DESIGNATE-ADDING or Inserting Sheets Press the Menu key Press the ↓Next key until Cover Ppr. Des. is displayed Both Covers-Copying Or Adding Front And BackPress the Both key Press the Exit key Press the Ppr.Des. key Press the ↓Next key until OHP Slip Sheet is displayed OHP Slip SHEET-COPYING or Inserting Slip Sheet OHP Slip SHEET-COPYING or Inserting Slip Sheet POSITIVE/NEGATIVE-COPYING in Complementaly Colors Double Copies-Copying The Image Twice On One Image REPEAT-REPEATING AN ImageDouble Copies Image Repeat Press the ↓Next key until Image Repeat is displayed Image Repeat-Repeating An Image Over The Entire CopyOriginal A5K/Copy paper A4K Or Original A5L/Copy paper A4L 100 Set your original, then press the Start key Original A5K/Copy paper A4L Or Original A5L/Copy paper A4K101 Select Image Repeat with the keys. Then, press the OK key Recalling The Stored Images Storing The ImagesDeleting The Stored Images Printing a List Of The Stored Images Press the ↓Next key until Archive File is displayed Storing The ImagesTo overwrite images already stored 103 104 105 Deleting The Stored ImagesPress the Menu key Press the Delete key Keys Printing a List Of The Stored Images106 Press the List key Enter the number of copies with the Number keys Recalling The Stored Images107 Press the ↓Next key until the Ar- chive File is displayed 108 Combination Chart 109 Combination Chart 110 Message If Your Machine does not Operate AS YOU Want111 112 Display 113 If YOU Cannot Make Clear Copies 114 115 If YOU Cannot Make Copies AS YOU Want 116 Adjust Image 117 Combine 118 Duplex 119 Loading PaperSquare the paper and set it in the tray Capacity Tray Loading Paper In The Large120 121 Adding Toner 122 123 124 Clearing Misfeeds 125 126 When D is lit 127 When C is lit 128 When R is lit 129 130 When P is lit 131 When Z is lit Fasten the fences with screws Adjust the back fence to the new paper sizeChanging the Paper Size 132 133 To adjust the paper size 134 Sheet Finisher Adding Staples 135 136 137 138 139 Removing Jammed Staples 140 141 142 143 144 Reinstall the punch waste boxPull out the punch waste box and remove punch waste 145 Accessing the User Tools Copy FeaturesEnter 2 with the Number key 146 Exiting From User Tools 147 148 User Tools Menu Copy Features 149 User Tools Menu Copy Features General Features 1/4 Settings YOU can Change with the User Tools150 151 152 General Features 153 Default 1-Sided → 1-Sided 154 155 Adjust Image 1/2 156 157 Adjust Image 2/2 158 159 160 Input/Output 1/2 161 162 Input/Output 2/2 163 164 Shortcut Keys 165 DOS and Donts Environments to avoid Where to PUT Your MachineMachine Environment Optimum environmental conditions 167 Power Connection 168 Access To Machine Maintaining Your Machine Cleaning The Platen CoverCleaning The Document Feeder Cleaning the machine 170 Mainframe Copying speed Type 1 and Type Copy paper weightNon-reproduction area First copy time 173 Reproduction ratioContinuous copying count Copy paper capacity 174 Power consumptionDimensions W × D × H up to exposure glass Space for main frame W × D Noise Emission Weight175 Document Feeder Option 177 Paper Tray Unit OptionAvailable paper size Paper capacity Number of bins Available paper size Internal Tray 2 1 BIN Tray Option178 Sheet Finisher Option 180 181 182 Punch KIT OptionPaper size 2 holes version Paper size 3 holes version 183 Large Capacity Tray LCT Option Duplex Unit Option Power consumption Max184 185 Bypass Tray Option Memory capacity Additional functions MB Copier Memory Unit Electric Sort KIT Option186 Additional function Copier Hard Disk Image Enhance KITOriginals scanned Originals stored for Archive File function Numerics Index188 189 190 Means Power ON. c means Stand by A2328651 Errata 340/350/450 Operating Instructions