Ricoh 340 PROGRAM-STORING Your Copy Settings in Memory, Storing Your Settings, Deleting a Program

COPYING

PROGRAM—STORING YOUR COPY SETTINGS IN MEMORY

2

You can store frequently used copy job settings in machine memory, and recall them for future use.

❖ Storing Your Settings

You can store your settings you frequently use.

❖ Deleting A Program

You can delete a stored program.

❖ Recalling A Program

You can recall a stored program.

C Press the [Store] key.

ND2C0101

D Select the program number you want to store these settings in with the <> keys. Then, press

Note

❒You can store up to ten programs.

❒Paper settings are stored based on paper size. So if you place more than one paper tray of a same size, the paper tray prioritized with the user tools will be selected first. See “12.Pap.Tray Priority” of the Sys- tem Settings.

❒Programs are not cleared by turn-

ing the power off or by pressing the {Clear Modes/Energy Saver} key. They are canceled only when you delete or overwrite them with an- other program.

Storing Your Settings

A Edit the copy settings so that all functions you want to store in this program are selected.

B Press the {Program} key.

C

eed Dial 1 2 3

ND2R01EE

the [OK] key.

When the settings are successfully stored, the m indicator appears.

ND2C0109

Note

❒Program numbers with m al- ready have settings in them.

❒If this program number is al- ready being used, the machine will ask you if you wish to over- write it - press the [Yes] or [No] key.

60