Accessories
Recommended Accessories
ItemSKU No.
Miter Saw Utility Vehicle .............. AC9940
Do not use any accessory unless you have received and read complete instruc- tions for its use.
WARNING: To reduce the risk of injury from unsafe accessories, use only accessories recom- mended.
Basic Blade Requirements
12" Diameter
1" Diameter Arbor Hole
Blades marked for slide compound miter saw use
Blades marked for 4,500 RPM or higher
Prohibited Accessories
WARNING: The use of any cut- ting tool except 12" saw blades which meet the requirement under recommended accesso- ries is prohibited. Do not use accessories such as shape cut- ters or dado sets. Metal cutting and the use of abrasive wheels are prohibited. See WARNING and CAUTION notes in the “Safety Instructions for Basic Saw Operations” section.
Using Carbide Tipped Blades
WARNING: To avoid the risk of cutting tool failure and thrown shrapnel (broken pieces of blade) read and understand all the warnings and instructions which come with carbide tipped blades. Failure to heed all car- bide tipped blade warnings and safety instructions can result in serious injury.
Carbide is a very hard but brittle material. Take care when mounting, using and stor- ing carbide blades to prevent accidental damage. Slight shocks, such as striking a tip during handling, can seriously damage
the blade. Foreign objects in the work- place, such as wire or nails, can also cause tips to crack or break off.
Before using a carbide tipped blade, always examine the blade and tips for damage. Look for bent teeth, a bent blade, cracks, broken, missing or loose carbide tips. Do not use a carbide tipped blade if damage is found or suspected.
Do not use a carbide tipped blade without all appropriate guards in place.
Mount blade securely in proper rotation direction.
Never rotate a carbide tipped blade faster than its maximum recommended speed.
44
