Controls

Control	Function
Bevel Lock Lever	Frees motor to rotate; locks in any
	desired position

Miter/Arm Lock	Frees radial arm to move; locks in
Lever	any desired position; pre-set
	indexed positions at 0°, 45°L,
	45°R
On-Off Switch	Turns motor on/off
Yellow Key	Allows saw to be switched on
Bevel Index Lever	Indexes the saw blade to 0°, 45°,
	or 90° pre-set index positions then
	release it
Rip Scale & Rip	Tells approximate distance
Indicators	between blade and fence when
	saw is in in-rip or out-rip position

Operation/Comments

Pull lever to release and push to lock Support motor before unlocking because it can swing down quickly

Bevel index lever must be unindexed before moving motor

Pull lever forward to release index then swing arm left or right Hold in unlocked position while moving arm Push lever to rear to lock arm

Pull on, push off

Requires yellow key

Insert into on-off switch

Move bevel index lever to the left while positioning the blade, then release it

Move blade carriage along arm to align line on indicator with desired number on scale