SECTION 8: MULTIBURNER CONFIGURATION & INSTALLATION

SECTION 8: MULTIBURNER CONFIGURATION & INSTALLATION

WARNING

Severe Injury Hazard

Secure burner to burner tube with bolts and lockwashers.

Hang heater with materials with a minimum working load of 75 lbs (33 kg).

Failure to follow these instructions can result in death, injury or property damage.

8.1 Initial Assembly

See Page 13, Section 6 for linear heater assembly instructions.

See Page 25, Section 7 for U-tube heater assembly instructions.

Check layout drawings for location of manifold pipe installation.

Figure 25: Multiburner Damper Flange Installation

WARNING

Cut/Pinch Hazard

Wear protective gear during installation, operation and service.

Edges are sharp.

Failure to follow these instructions can result in injury.

 

Damper Flange

 

Assembly

Fan Tube

Note:

Weld Spot

Install in the

 

fully open position

 

35 of 75

Page 41
Image 41
Roberts Gorden BH30UT/EF, BH35UT/EF, BH40DL, BH35ST/EF, BH60DL/EF Multiburner Configuration & Installation, Damper Flange