SECTION 7:
Step 7.5 Coupling and Tube Assembly
A Close coupling | B Start slide bar/coupling lock |
with tab. | onto coupling. |
| Tab |
| Slide Bar |
| Wide End |
Open | Coupling |
| 76 mm to |
| 101 mm |
| Closed |
C Insert tubes into coupling. | D Tighten coupling to join tubes. | ||
|
| Slide Bar | |
|
| Coupling | |
Orient coupling so that |
|
| |
the impact block is in the |
| Tube | |
2:00 or 10:00 o’clock |
|
| |
positions |
|
| |
Tube |
|
| |
Tube | Description | Part Number | |
Coupling | 01329600 | ||
| |||
| Slide Bar/Coupling Lock | 01329700 | |
| Tube | 91409408 | |
Step 7.5.1 Coupling and Tube Assembly (Continued)
Tighten slide bar as shown below.
Drive slide bar until tight. End of slide bar should be within tolerance listed below.
± 50 mm
Correct Slide Bar
dimensions
Incorrect Slide Bar
position
• Repeat Step 7.5 A - D until all tubes are assembled.
31 of 75
