Navigating your iPod
1.Use the Menu button on the remote control to navigate to higher level menus on your iPod.
2.Use the Folder Up or Down buttons on the remote control as required to move up and down a menu screen on your iPod.
3.Press the Select button to choose the highlighted on screen menu item. If this item is a lower level menu item, you may then navigate further using the Folder Up or Down and Select buttons.
Note: iPod models vary in how they respond to the menu button. Not all iPods allow full menu navigation.
Playing a file on your iPod
1.When you have found the required item use the Select button to start the iPod playing (or the Play / Pause button - but see note below).
2.Adjust the volume to the required setting using the Volume buttons on your radio.
3.To pause playback press the Play / Pause button. To resume playback press the Play / Pause button again.
4.iPod's do not have a Stop button (they use the Pause function). To play analternativeselection,usetheiPodmenustomaketheselectionusing the Play / Pause button to stop playing the current item if needed.
Note: iPods vary in how they respond to the Play / Pause button dependent upon the iPod model and software revision. Play / Pause may pause and resume the current selection, or it may pause the current selection and then start playing a new selection. The use of the Select button to start playing an item avoids this inconsistency.
1
2,3
1
2 2
3,4
iPod Docking
If you need any further advice, please call our Technical Helpline on 020 8758 0338 | 90 |
