CD track programming

In addition to playing of complete CDs, selected tracks, or a random selection, the CD player allows you to programme a sequence of up to 20 tracks to be played in whatever order you choose.

1.With the unit in CD mode and with a CD inserted, make sure that the CD is stopped (press the Stop button).

2.To enter programming mode, press the Auto button (on the remote control).

3.Choose the fi rst track using the Fast-forwardor Rewind buttons.

4.Press the Auto button to enter the selected track into the programme.

5.Choose another track using the Fast-forwardor Rewind buttons, and enter it into the programme using the Auto button (track 10 in example shown).

6.Repeat step 5 to store as many as 20 tracks in the programme.

7.When the programme is complete, press the Play / Pause button to start playing. The tracks will then be played in the order that you have just programmed.

8.Pressing the Stop button, or switching to another operating mode will erase the programme.

Note: If you are programming the tracks using a CD with MP3 or WMA

les in folders (see the following pages), you can also use the Up or Down Folder buttons to specify the folder in steps 3 and 5 above.

1,8

2-5

3,5 3,5

7

75

Page 76
Image 76
Roberts Radio 63I manual CD track programming