Clock and Alarms

Automatically updating the clock

Your radio will normally update the clock automatically when connected to the internet. If you enter a time setting manually, the radio will calculate a local time offset which is then stored in memory. Whenever it synchronises the clock using the internet, including after a power failure, your radio will then set the clock automatically using this information.

You may wish to use the radio away from the internet, in which case you may specify that the unit sets its clock from DAB or FM radio broadcasts. After a power failure the radio will then set its clock the next time that you turn on the radio in DAB or FM mode.

Alternatively you may specify that the time is not automatically updated. In this case the clock must always be set manually after a power interruption.

1. With your radio switched on, press and hold the Menu button to

 

access the menu for the current mode.

1

2.PresstheMenuUporDownbuttonsuntil'Systemsettings'ishighlighted on the display. Press the Select button to enter the system settings menu.

3.Press the Menu Up or Down buttons until 'Time/Date' is highlighted

 

on the display. Press the Select button to enter the time setup.

2-5

2-5

4.

PresstheMenuUporDownbuttonsuntil'Auto update' ishighlightedon

 

 

 

the display. Press the Select button to enter the auto-update menu.

 

 

5.

Press the Menu Up or Down buttons to choose an update option

 

2-5

 

from 'Update from DAB', 'Update from FM', 'Update from Network'

 

or 'No update' as required. Press the Select button to confi rm your choice. The radio will then exit to the previous menu display.

Clock and Alarms

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)

92

Page 93
Image 93
Roberts Radio 63I manual Clock and Alarms, Automatically updating the clock