Finding new DAB radio stations
Should you wish to use your radio for DAB reception in a new location, |
|
or if no stations were detected during the initial scan, you can follow this | 1 |
procedure to allow your radio to fi nd out which DAB radio stations are |
available.
1.Ensure that the telescopic antenna is extended, and then press the Radio button as needed to select DAB radio mode.
2
2. Once in DAB mode press and hold the Menu button.
3. Press the Menu Up or Down buttons until 'Full scan' is highlighted on the display.
DAB Radio
4.Press the Select button to initiate the scan. The display will show 'Scanning' and your radio will perform a scan of the DAB Band III frequencies. As new stations are found the station counter will increase and stations will be added to the list. The bar graph indicates the progress of the scan.
5.Alternativley press the Auto button on the remote control to initiate a scan of the DAB Band III frequencies.
The Auto button may not operate in all display modes. In this case use the menu option above.
3 3
4
5
If you need any further advice, please call our Technical Helpline on 020 8758 0338 | 60 |
