Setting the alarm clock - cont.

9. Press the Menu Up or Down buttons until the 'Volume:' option is highlighted on the display and press the Select button if you wish to change it. The radio uses the saved volume setting for each alarm when it sounds.

Set the required volume using the Menu Up or Down buttons and the Select

Clock and Alarms

button to confi rm the setting.

9-10 9-10

10. In order to store the alarm settings press the Menu Up or Down buttons until

 

'Save' is highlighted. Press the Select button to store the alarm settings. Your

 

radio will show 'Alarm saved' and will then go back to the list of alarms with

 

the new alarm setting shown in the display.

9-10

If you decide not to save the settings, press the Back button. The display will show 'Save changes' with a 'YES' or 'NO' option. press the Menu Up or Down buttons to choose 'NO' and then press the Select button. 'Alarm not saved' will show on the display.

Active alarms are shown using small alarm indicators at the bottom of the playing displays and on the clock display when in standby.

Note: If you make a mistake at any point while setting the alarms, use the Back button to go back to the previous screen.

When the alarm sounds

The buzzer or radio alarm will sound at the selected times for up to 60 minutes unless cancelled. The volume used for the alarm will be as specifi ed during the alarm setting procedure. If the radio cannot connect to the specifi ed radio station, the buzzer alarm will be used instead.

To cancel an alarm, press the On/Standby button to return to standby mode.

The alarm icon will flash at the bottom of the playing mode displays, and the radio will automatically switch back to standby mode when the 60 minutes have elapsed.

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)

98

Page 99
Image 99
Roberts Radio 63I manual When the alarm sounds