EM-55 Owner’s Manual

Using the multi-effects processor (M-FX)

Your EM-55 contains a multi-effects processor that can be assigned to the Keyboard parts (Upper 1/2, Lower). You can select one type and decide which Keyboard part(s) should use the effect. The M-FX can be used simultaneously with the Reverb and Chorus effects.

(1) Press the [M-FX EFFECTS] button.

M-FX

EFFECTS

Its indicator lights, and the Upper 1 part is now processed by the effect type currently assigned to the M-FX processor (“Rotary”).

(2)Press the [UPPER 1] button (indicator must light).

(3)Play a few notes in the right half of the keyboard, and switch the [M-FX EFFECTS] button on/off to hear the difference.

(4)Press the BENDER/MODULATION lever towards the back of the EM-55.

The speed of the Rotary effect now changes (either slow or fast undulations).

Note: A Keyboard part that uses the M-FX cannot be processed by the Reverb or Chorus effect. But as you will see on p. 44, the M-FX also contains Reverb and Chorus algorithms (either in isolation or in combination with other effects).

ENGLISH

Selecting another M-FX type

The Rotary effect that is assigned to the M-FX by default is a wonderful effect for organ and other sounds.

For a guitar sound, however, working with dis- tortion can be more effective. In fact, the EM-55 provides 47 different M-FX types (see the list on p. 44), some of which are combinations of two effects for added flexibility. Here is how to select another M-FX type:

(1)Press and hold the [M-FX EFFECTS] button until the message line in the upper left- hand corner reads “M-FX”:

VALUE Rotary

(2)Use the [TEMPO/DATA] dial to select another M-FX type.

(3)Again play a few notes and listen to what

it sounds like.

Note: M-FX type selection can also be linked to Tone selection for the Upper 1 part. See “Tone MFX” (p. 45).

29

Page 29
Image 29
Roland EM-55 owner manual Value Rotary, Using the multi-effects processor M-FX, Selecting another M-FX type