Roland EM-55 owner manual Value Chorus, Balance, This selects the CHR function, Leave this

EM-55 Owner’s Manual

Chorus

(1)Press and hold the [FUNCTION] button, while pressing the BANK/NUMBER [7] button.

FUNCTION

7

This selects the “CHR” function:

VALUE Chorus 3

(2)Use the [TEMPO/DATA] dial to select one of the available types. Select “OFF” if you do not need the Chorus effect.

Off	Chorus 3	Flanger
Chorus 1	Chorus 4	S-Delay
Chorus 2	FB Chorus	SDelayFb

We could try to describe them, but you will get a better idea by selecting one after the other. Flanger or FB Chorus can be inter- esting for guitar Tones.

Again, there are two echo effects: Short Delay (“S-Delay”) and Short Delay with Feedback (“SDelayFB”). They are, however, much shorter than those available for the Reverb effect processor.

(3)Press [SONG], [STYLE], [TONES], [USER PROGRAM], or [MUSIC ASSISTANT] to

leave this page.

Note: The Chorus Send Level of the Upper 1/2 and Lower parts is set to “0”, which means that these parts are not automatically processed by the Chorus effect. See the Chr UP1, UP2, and LWR parameters on p. 45 and following for how to set them.

ENGLISH

Balance

The BALANCE [√ACCOMP] and [KEYBOARD®] buttons allow you to change the volume balance between the Arranger (or Song) parts and the Keyboard parts (the ones you can play yourself).

(1)Press BALANCE [√ACCOMP] if the Arran- ger (or Song parts) are too soft.

(2)Press BALANCE [KEYBOARD®] if you

think your solo playing should be louder. Not all Keyboard parts are available at all times.

Note: See p. 43 for setting the volume of individual parts.

31