Roland FR-5, FR-7 owner manual ORC CHD Edit parameters, Orc Chord Volume

(3) Press the [DATA÷ENTER] knob to confirm your selection.

V-Accordion r

7. ORC CHD EDIT parameters

7. ORC CHD EDIT parameters

The parameters of the ORC CHORD EDIT group apply to the chord button rows of the Bass section. As stated earlier, the FR-7/FR-5 allows you to play and accordion sound with the bass rows and an orchestral sound with the chord rows of the bass keyboard (and vice versa). See page 29 for details about the Orchestra Chord section. (You can also combine the Orchestra Chord section with the

Orchestra Bass section if you like.) See pages 38 and 40 for how to select and adjust the parameters. Press [UP] and [DOWN] simultaneously to select the value that is indicated as “Default setting”.

	(5) Press the [DATA÷ENTER] knob to confirm your
Important note
	selection.
The selection of Orchestra Chord can be automated	Depending on what you chose in step (3) above, the
using the “2.14 Orchestra Chord Link” parameter	display now looks as follows:
(page 47) – for each Treble register.		If you selected “Current” or	If you selected “ALL”
		“Curnt+SCom”
Saving your changes
Any changes you make can be saved using the WRITE
function. Though there is no need to save your changes
right after performing them, please bear in mind that
		(You cannot select a different register,
they will be lost in the following cases:		or change the name of the current

one.)

• When you select another Set

• When you switch off the FR-7/FR-5	(6) Use the [DATA÷ENTER] knob or the [UP]/[DOWN]
	buttons to select the Set that should contain your
Changes you want the FR-7/FR-5 to remember must be
	changed version(s).
saved as soon as possible. Here is how:
	Change this setting only if you do not want to save
(1) Press and hold the [MENU÷WRITE] button until the
	your settings to the current Set.
following page appears:
	(7) Press the [MENU÷WRITE] button to save your
	changes. The display briefly shows a confirmation:

(2) Rotate the [DATA÷ENTER] knob (or use the [UP]/

[DOWN] buttons) to select “Orc. Chord”.

(8) Press the [EXIT÷JUMP] button to return to the Main page.

Note: See pages 38 and 40 for how to select and adjust the parameters below.

(4)Use the [DATA÷ENTER] knob or the [UP]/[DOWN] buttons to specify what you want to save: Current: The register you are currently editing.

Currnt + The register you are currently editing as

SCom:	well as the Set Common settings
	(page 63).
ALL	All registers. This is probably the safest
	bet, because it ensures that no Orchestra
	Chord register will be forgotten. (It is per-
	fectly possible to edit several registers
	without saving them.)

7.1 Orc Chord Volume

(Off, –40~“Std”~40, Default set- ting: Std) This parameter allows you to create the desired “mix” (volume balance) between the Orchestra Chord section and the other active sections.

This is a relative parameter, which means that its value is added to or subtracted from the standard value (“Std”).

59