Using the
3
Use the [INC] and [DEC] buttons to select a different tone or
rhythm set.
When you switch tones, the knobs and other settings included in that tone will be reflected by the pattern. This means that the sound will be heard in a different way than for the original pattern.
*If you select a different pattern or turn off the power, the pattern will revert to its original tone or rhythm set. If you want to keep your new setting, you must carry out the Save procedure (p. 30).
Editing other sound settings
In addition to the settings of the six knobs, each tone has many other settings (parameters) that determine the resulting sound, and you can edit the values of these parameters.
*A rhythm set does not have any adjustable parameters other than the volume setting of each rhythm tone.
1
Select a pattern.
2
Hold down the [SHIFT] button and press one of the step
The display will show the value of the parameter you selected.
For an explanation of each
parameter, refer to p. 68.
3
4
5
LFO rate | LFO waveform | OSC waveform | OSC vibrato depth | Filter type | Filter envelope attack time | Filter envelope sustain level | Filter envelope release time | Filter LFO depth | Amplifier envelope depth | Amplifier envelope attack time | Amplifier envelope decay time | Amplifier envelope sustain level | Amplifier envelope release time | Amplifier LFO depth | Effect type (LEAD) Vintage mode (BASS) |
Use the [INC] and [DEC] buttons to adjust the value.
If you want to adjust the value of another parameter, press another step
While you press the step
abbreviation of the parameter name.
When you are finished making settings, press the [EXIT] button.
*These settings will revert to their original values if you select another pattern or turn off the power. If you want to keep your new settings, you must perform the Save operation (p. 30).
21
