Applying an effect
Using effect control to perform
When you play back an effect pattern for which Effect Control is specified,
the effect will change consecutively.
1
Select an effect pattern for which effect control has been specified (p. 42).
2
As necessary, adjust the tempo at which the effect setting will change (p. 57).
3
Press the [ 
](PLAY) button to begin playing the effect pattern. If you are applying the effect to the external input, start playing the external input as well.
If a loop has been recorded in the looper, the loop will begin playing at the same time.
4
To stop playback, press the [ 
](STOP) button.
Making effect control settings
1
2
3
4
Select an effect pattern (p. 42).
As necessary, change the effect settings or effect type.
* Do not select an effect type that does not use effect control ( | , | , | , | ||
, | , or | ). Effect control settings cannot be made if you select one | |||
of these effect types. |
|
|
|
| |
Press the [SEQ REC] button.
This puts you in Step Edit mode, where you can make effect control settings.
Press the [SETUP] button.
Now you are ready to make effect control settings.
46
