Roland MC-09 owner manual Parameter list, DSP synthesizer parameters, Common to Lead and Bass

Parameter list

DSP synthesizer parameters

Common to LEAD and BASS

1

Parameter	Range	Controller	Parameter function
LFO rate	0–120,	[SHIFT] + STEP [1]	Specifies the LFO speed. If a note value is selected, the
	note value		LFO will synchronize to the tempo.
LFO waveform	TRI, SQR, SAW, S-H	[SHIFT] + STEP [2]	Selects the LFO waveform
OSC waveform	TRI, SAW, P10–P30,	[SHIFT] + STEP [3]	Selects the oscillator waveform
	P1S–P3S, P1D–P3D		*1
OSC vibrato depth	0–127	[SHIFT] + STEP [4]	Specifies the depth of vibrato
Filter type	LP1, BP1, HP1, LP2,	[SHIFT] + STEP [5]	Selects the type of filter (Low Pass Filter, Band Pass Fil-
	BP2, HP2		ter, High Pass Filter)
			* LP1: slope = -12 dB, LP2: slope = -24 dB
Filter envelope attack time	0–127	[SHIFT] + STEP [6]	Specifies the time from when the keyboard pad is
			pressed until the maximum filter change is reached
Filter envelope sustain level	0–127	[SHIFT] + STEP [7]	Specifies the cutoff frequency at which the filter stops
			changing
Filter envelope release time	0–127	[SHIFT] + STEP [8]	Specifies the time from when the keyboard pad is re-
			leased until the filter stops changing
Filter LFO depth	0–127	[SHIFT] + STEP [9]	Applies a wah effect
Amp envelope depth	0–127	[SHIFT] + STEP [10]	Adjusts the depth of the amp envelope
Amp envelope attack time	0–127	[SHIFT] + STEP [11]	Specifies the time from when the keyboard pad is
			pressed until the maximum volume is reached
Amp envelope decay time	0–127	[SHIFT] + STEP [12]	Specifies the time from when the maximum volume is
			reached until the sustain level is reached
Amp envelope sustain level	0–127	[SHIFT] + STEP [13]	Specifies the level at which the volume stops changing
Amp envelope release time	0–127	[SHIFT] + STEP [14]	Specifies the time from when the keyboard pad is re-
			leased until the sound disappears
Amp LFO depth	0–127	[SHIFT] + STEP [15]	Applies tremolo
Effect type	OD1-2 (overdrive 1–2),		Specifies the type of effect
(when LEAD is selected)	DS1–2 (distortion 1–2),
	PH1–4 (phaser 1–4),
	SL1–2 (slicer 1–2),	[SHIFT] + STEP [16]
	OFF (no effect)
Vintage mode	OFF, ON		Specifies whether the filter characteristics and parameter
(when BASS is selected)			ranges of a vintage synthesizer will be simulated

*1: For some tones, it is not possible to change the OSC waveform.

fig.2-4b

	Filter/Amplifier envelope						LFO waveform		OSC waveform
Note on					Note off		TRI
(pad ispressed)					(key is released)			P10
							(Triangle wave)	P1S
							SQR	P1D
								P20
							(Square wave)
								P2S
							SAW	P2D
								P30
							(Sawtooth wave)
								P3S
							S-H	P3D
								PWM = 0 : P10, P20, P30
							(Sample and
							hold wave)	PWM = slight : P1S, P2S, P3S
				Sustain level				PWM = deep : P1D, P2D, P3D
	Attack	Decay			Release
	time		time			time

fig.wave

68