Part 2 Performing Marking
Press down on the workpiece gently to secure it in
4 place.
Pressing down forcefully may make it difficult to remove the workpiece from the base.
Loosen the screw and press down from above with the
5 leveler.
Press down until the leveler completely touches the top surface of the base. There is no need to use excessive force.
While pressing down with the leveler, tighten the
6 screw.
When tightening the screw, be careful not to let the height of the surface to be marked change.
Load the base on the machine.
7 Slowly press it in inward until it makes contact.
Press it inward securely until it makes contact. Do not stop partway, before contact is made.
8 | Close the cover. |
18
