30
Part 2 Performing Marking
4. Finishing
When marking ends, remove the workpiece and switch off the power.
1Grasp the base on both sides and pull back toward you
to remove.
2Remove the workpiece from the base.
If the workpiece is difficult to detach, inserting a thin,
flat object (such as a piece of sheet metal or a piece of
stiff paper) between the adhesive sheet and the
material may make the workpiece easier to remove.
3Loosen the screw.
4Load the base on the machine.
Slowly press it in inward until it makes contact.
5Press the [STANDBY] key to switch off the power.