Part 2 Performing Marking
2. Loading the Workpiece
1
2
Open the cover.
Grasp the base on both sides and pull back toward you to remove.
Place the workpiece so that the center of the place to
3 mark is aligned with the center of the scale.
Important!
Powder or dust on the adhesive sheet can reduce the sheet's adhesive force, making it impossible to secure material in place.
If the adhesive force has been reduced, then wash the adhesive sheet. Washing the sheet revitalizes its adhesive force. For information on how to clean the adhesive sheet, take a look at Part 4, "Cleaning the Adhesive Sheet."
Marking location | Location where the workpiece |
on the image | is placed on the base |
|
|
| Center line |
Center line
17
