Roland MPX-50 user manual Starting Marking

Click [OK].

The [Print] dialog box appears again.

Click [Image Correction] tab.

Part 2 Performing Marking

3-3 Starting Marking

Operate Dr. METAZA to send marking data to Metaza.

If the power to Metaza is off, press the [STANDBY]

1 key to switch it on.

Power-on initialization is performed, then operation stops.

From the [File] menu, click [Print].

2 The [Print] dialog box appears.

Click the drop-down arrow for "Name," then click

3 [Roland METAZA MPX-50].

If this is already selected, then go on to the next step.

Click [Properties].

4 The [Roland METAZA MPX-50 Properties] dialog box appears.

5

Click the drop-down arrow in the figure, then click the

6 composition of the workpiece. In this example, choose [Brass].

7

Click [OK].

8 The marking data is sent to Metaza, and marking starts.

26