46
Chapter 2 Using the XV-5080 Effects
5: SPECTRUM
Spectrum is a type of filter which modifies the timbre by
boosting or cutting the level at specific frequencies. It is
similar to an equalizer, but has 8 frequency points fixed at
locations most suitable for adding character to the sound.
fig.2-08
Gain
250Hz (Band 1 Gain)
Adjust the 250 Hz level.
500Hz (Band 2 Gain)
Adjust the 500 Hz level.
1000Hz (Band 3 Gain)
Adjust the 1000 Hz level.
1250Hz (Band 4 Gain)
Adjust the 1250 Hz level.
2000Hz (Band 5 Gain)
Adjust the 2000 Hz level.
3150Hz (Band 6 Gain)
Adjust the 3150 Hz level.
4000Hz (Band 7 Gain)
Adjust the 4000 Hz level.
8000Hz (Band 8 Gain)
Adjust the 8000 Hz level.
Band Width
Q
Simultaneously adjust the width of the adjusted areas for all
the frequency bands.
Output
Level (Output Level) #
Adjust the output level.
Pan (Output Pan) #
Adjust the stereo location of the output sound. L64 is far left,
0 is center, and 63R is far right.
6: ENHANCER
The Enhancer controls the overtone structure of the high
frequencies, adding sparkle and tightness to the sound.
fig.2-09
Enhancer
Sens (Sensitivity) #
Adjust the sensitivity of the enhancer.
Mix Level #
Adjust the ratio with which the overtones generated by the
enhancer are combined with the direct sound.
EQ Gain
Low (Low Gain)
Adjust the gain of the low frequency range.
High (High Gain)
Adjust the gain of the high frequency range.
Output
Level (Output Level)
Adjust the output level.
Spectrum
L out
R out
Pan R
Pan L
L in
R in
L in
R in
L out
R out
Mix
Mix
Enhancer
Enhancer 2-Band
EQ
2-Band
EQ