Rugged Outback ELX4-60 manual IP AddressURL, Port, Band Width LimitKB/s

ADVANCED CONFIGURATION ELX4 -60

User ID/Password

The related IP camera’s ID/Password should be entered. Default value is “guest/guest.” To change the ID/Password, press [ENTER] to open the dialogue box (similar to the “Name” box.)

Type

Set “I-Rec” by pressing the [ENTER] button and using the ￿ ￿ or ￿ ￿ buttons.

CH

Designate the channel for the IP camera. For example, the B106 has 6 possible channels, the I-Rec B104 has 4 possible channels, etc.

IP Address(URL)

Press the [ENTER] button to open related dialogue box to manually enter an IP address . To register an IP cam, there are two methods; manually enter the IP using the dialog box (similar to the box for “Name”) or select an IP from the Local IP Cam List. To use the Local IP Cam List, please refer to the next page.

Port

Press the [ENTER] button to open the related dialogue box to manually enter the Port Address. The default values are different according to IP camera type; “8080” is the default and “8001” is the “i-Rec” default.

Band Width Limit(KB/s)

To control transfer speed with data siz e. Basically ELX4 -60 can also control it with ips control. It can be set between 10KB and 100KB against the overload of network bandwidth. When setting 1ips at network camera menu and 10KB at this menu, ELX4-60 receives video data of 1ips within 10KB. If data size is 9KB, it will not be problem. But if it is 11KB, one image will not be able to be transmitted per second.

Rugged CCTV 2003.05.21 (v 1.0) 57