Rugged Outback ELX4-60 Monitoring, Viewing basic screen Quad-split, Viewing single full screen

ELX4 -60 BASIC CONFIGURATION

Basic Configuration

3. Monitoring

Once power is supplied to ELX4 -60, default quad-split monitoring mode (analog channels 1~4) will be displayed. Th e following steps apply for all ELX4 -60’s monitoring menus.

<Button control>

-Press the [MULTI] button on the front panel of ELX4 -60 to change the split configuration (4, 9, 16, 13).

-For sequence mode, press the [SEQ] button on the front panel of ELX4 -60. To configure the sequential cycle, access the “Monitor” tab of Configuration Menu.

3.1. Viewing basic screen

(quad-split)

-Insert AC cord’s plug in a wall outlet and turn the power switch “On.”

-LED is on and ELX4-60 starts booting.

-After start -up, the basic screen (quad -split) is displayed.

* If user password is set, a dialogue box for entering the password will appear.

3.2. Viewing single full screen

-Press the desired channel number button on the front panel of ELX4-60.

-When selecting channels between channel 10 and 16, press the [+10] button first, then the second number.

-To return to the multi-view screen, press the [MULTI] button.

3.3. Viewing multi screen

-Press the [MULTI] button to view several channels simultaneously.

-To change the split screen configuration, press the [MULTI] button. 4, 9, 16, or 13 split screens will be displayed.

-In quad-split mode, images of channels 1 to 4 are displayed. Channels 1 to 9 are displayed in 9-split mode, channels 1 to 16 in 16-split mode, and channels 1 to 13 in 13-split mode.

12 2003.05.21 (v 1.0) Rugged CCTV