Rugged Outback ELX4-60 manual Configuration, Quick Setup, Delete Data, Date/Time

BASIC CONFIGURATION ELX4 -60

4.3.3. Delete Data

To delete a specific file range from the current recording HDD. This menu does not affect backup disk. The beginning of the range is always the beginning of the recording on the HDD.

5. Configuration

5.1. Quick Setup

There are three menus for recording setup; Quick Setup, Normal Recording, Alarm Recording menu in Configuration Menu. Quick Setup is the easiest set-up, activating all four analog cameras to record with the same settings and conditions . Normal recording is the standard recording settings and can be customized based on time and channel. Alarm recording is the recording schedule based on alarm conditions (Motion Detection, Sensors, etc.) Also, Quick Setup has time setting menu.

5.1.1. Date/Time

When ELX4-60 is manufactured in factory, time zone will be set as “GMT + 9:00 ”. Set the time to local time zone.

Changing ELX4 -60 time may cause time conflict with recorded images. In this case, it is strongly recommended to re-format the hard drives after making changes.

Button control

-Press [MENU] button on ELX4 -60 front panel.

-Move to “Quick Setup” menu (First tab on the Configuration menu).

-Move to “Date/Time” below “Quick Setup ” using downward arrow button on ELX4-60 front panel.

-Press the [ENTER] button on ELX4-60 front panel.

-Set time. (The following picture will be displayed when setting time menu)

-In order to access each menu, press [ENTER] button after selecting it with upward/downward

arrow button on ELX4-60 front panel.

Rugged CCTV 2003.05.21 (v 1.0) 21