Status, Type, Color, PTZ Port, Address | Rugged Outback ELX4-60

BASIC CONFIGURATION

ELX4 -60

Status

Set “On/Off” using the or buttons after pressing the [ENTER] button.

Type

Displays the video -input signal. NTSC is the signal used in North America. To toggle the setting, use dip switch on the rear panel of ELX4-60.

For each of the following settings, use the [ENTER] button to access the setting, then the [ARROW] buttons to change the values.

Color

Set “Color/ B/W” using the or buttons .

Gain/Brightness/Contrast

Set the value between –9 and +9 using the or buttons.

PTZ Port

Set the value using the or buttons .

Address

Press the [ENTER] button to open the dialogue box.

Rugged CCTV

2003.05.21 (v 1.0)

27

Image 27

Rugged Outback ELX4-60 manual Status, Type, Color, Gain/Brightness/Contrast, PTZ Port, Address

Contents

User’s Guide Cctv Monitor User ELX4-60 FCC Compliance Statement Important Notice Rugged Cctv ELX4 Setting at Text menu Setting at Serial Setup’s RS232 menu Appendix #2 Utilizing IP Addresses on Local Network Introduction What is ELX4-60? ELX4-60 Key features Front Panel Product Description DIO Rear Panel Installation Summary Viewing multi screen MonitoringViewing basic screen Quad-split Viewing single full screen Viewing all channels with sequence mode Viewing an alarm triggered channel Viewing images with Digital ZoomViewing with connected PTZ Zoom/Focus Control Load PresetSave Preset Pan/Tilt Control Playback Using RelayUsing Screen Lock Playback via various mode Playback via split screen Playback with Digital ZoomVarious playback modes Button control Using Search Mode Select Disk Copy / Backup / Delete Data ManagerCopy Image Seconds Start Date & Time / End Date & Time Backup Manager Date/Time ConfigurationQuick Setup Delete Data Date/Time Time ZoneDaylight Saving Time Format Recording Audio Recording Configuration StatusChannel Status Recording Speed/Quality Name Camera Analog Camera Channels Ch ~ Ch TIP Gain/Brightness/Contrast StatusType Color Time Schedule Normal Rec. Analog Camera Channels Ch ~ Ch Special Time Recording Setting Time ScheduleWeekday Start/End Day Start/End Event Recording Setting Special Time Alarm Rec. Analog Camera Channels Ch ~ Ch MD AreaSensor 1/2/3/4 Setting MD Area Pre Alarm secText Post Alarm sec Setup RelaySpecial Time Seq. Switchingsec Alarm Pop-up/Pop-up HoldsecMonitor Audio System Device TextRecording / Monitoring Sync Text With Lines Timeout msSeek Header Delimiter To designate Weekday/Weekend and Day/Night Time Schedule Special Time Security User PasswordAdmin Password Remote Setup Auto Del. Normal Disk SetupAuto Del. Alarm Backup Reminder Network Network DNS Server IP Address IP Address, NetMask, and Gateway Address XDSL User ID/Password HRS Interval HRS Group ID Monitoring Port / Playback Port TP Server PortFirewall / Port Serial Setup InterfaceBaud rate/Parity/Stop bit/Data bit Remote Control ID How to register remote controllerMiscellaneous Keyboard PTZ Addr Alarm BuzzerReset Values Keyboard Control Addr Utility Disk Manager Type Activating IP Cam menus Using IP Cam Configuration Camera Setting IP Camera Channels Ch ~ Ch IP AddressURL PortBand Width LimitKB/s Local IP Cam List SearchSelect Cam Normal Rec. IP Camera Channels Ch ~ Ch Alarm Rec. IP Cam Channel Ch ~ Ch Recording Speed/Quality & Pre Alarm & Post AlarmIP Cam Event Connecting External Device Using Text DeviceSetting at Text menu Setting at Alarm Rec. menu Setting at Serial Setup’s RS232 menu Setting at Normal Rec. menu Setting at Serial Setup’s PTZ menu Using Keyboard Appendix Appendix #1 Technical Specification Appendix Appendix IP construction Appendix #2 Utilizing IP Addresses on Local Network#2.1 Introduction #2.2 IP construction and Network class Features of Addresses Network configuration To use as one network#2.3 C-class Network To use as three sub-networks 1/4 + 1/4 + 1/2 To use as two sub-networks 1/2 + 1/2 To use as four sub-networks 1/4 + 1/4 + 1/4 + 1/4 Appendix