Rugged Outback ELX4-60 manual Appendix

APPENDIX ELX4 -60

Pre / Post Alarm Recording	Pre Alarm Recording: 1 ~ 10 seconds
	Post Alarm Recording: 1 ~ 60 seconds
Intelligent file system	Data-loss protection against power failure
Event Triggered Video Data Preservation	Overwrite prevention of Event triggered data
Event Log Recording	Log archiving on HDD
	Log search & monitoring via Network
Data (Video & Audio Clip) Back-up	External HDD: IEEE1394 (FireWire) or USB
	PnP Memory Stick: USB port
Data Copy (Max. 1 minute’s video clip)	VHS Video Tape: Video output port for VCR
	Backup Notification: Daily / Weekly / Monthly
	PnP USB storage(Compact Flash, Smart Media,
	Memory Stick, SD Card)
Displaying Performance	Frame Rate on CCTV Monitor: Max. 120fps
	Frame Rate on PC : Max. 60ips
	Display Channel: Quad, Auto Sequential
	Misc.
	Play speed: 1x, 2x, 4x, 8x, 16x (FDW & REV)
	Supports Step-Forward, Step -Reverse.
	Instant data access based on time and event log
Digital Zoom	2 times digital zoom (Live & Playback Mode)
Event Triggered Pop-up Video	Triggered by motion detection or sensor input
PTZ Control	Ports: RS232, RS485/RS422
Local User :	Front panel push button & IR Remote
	(controls IP video channels as well)
Remote User :	On -the-screen PTZ control on PC
	Preset: 8 points per channel
	Group: 1 group per channel
	Return Home Position ’ support
Sensor Inputs and Alarm Outputs	Software-controlled 4 sensor input s
	Software -controlled 4 alarms output s

Rugged CCTV 2003.05.21 (v 1.0) 67