Rugged Outback ELX4-60 manual Using Relay, Using Screen Lock, Playback via various mode

ELX4 -60 BASIC CONFIGURATION

3.8. Using Relay

-To set relay on/off. (ELX4 -60 supports four relay outputs.)

-Press the [SEARCH/RELAY] button.

-The icon of “Relay On” shows.

-Press the relay number button between 1 and 4, and then the related relay out signal will be transmitted.

-In order to set relay off, press the [SEARCH/RELAY] button again.

-Then “Relay On ” shows because relay keeps being set as on.

- Press the [SEARCH/RELAY] button again, and then the icon of “Relay Off” will show. - Press the relay a number button to set off.

3.9. Using Screen Lock

-To set screen lock.

-For this function, user password should be set at first.

-If pressing the [EXIT/LOCK] button for 2~3 seconds, lock mode will run with showing “Screen Locked” message.

-If lock mode runs, any function button will not be operated.

-In order to cancel lock mode, user password should be entered.

4. Playback

To replay recorded images in full screen or quad split screen modes.

4.1. Playback via various mode

4.1.1. Playback via basic screen (full screen)

-Press the Play [ ￿] button during monitoring mode.

-Play [ ￿] button will begin playback of the last 1minut e, 45 seconds of recorded video at 1X speed.

<Note>

When pressing the play button in multi-monitoring mode, channel 1 is always the channel displayed. More specifically, images recorded on Channel 1 during the last 30 seconds are always displayed. However pressing the playback button in single-channel monitoring mode, will display the selected channel. To display another channel, press the corresponding number button on the front of ELX4-60.

16 2003.05.21 (v 1.0) Rugged CCTV