Rugged Outback ELX4-60 manual Camera Setting IP Camera Channels Ch ~ Ch, Configuration

ELX4 -60 ADVANCED CONFIGURATION

6.2. Camera Setting – IP Camera Channels (Ch. 5 ~ Ch. 16)

Setting up the IP Cameras is similar to setting up the analog channels. However there are specific menus only for IP cam; for example, the ‘Configuration’ menu and ‘Network’ menu in the IP cam setting menu.

6.2.1. Configuration

Button control

-Press [MENU] button and move to each “IPCam #5 to #16“ below “Camera” menu. Then select “Configuration” menu by pressing the [ENTER] button and using the ￿ ￿ or ￿ ￿ buttons .

Name

Press the [ENTER] button to open the related dialogue box and change the camera name.

Status

Press the [ENTER] button and use the ￿ ￿ or ￿ ￿ buttons to set the camera to “On” or “Off.” Unlike the analog channels, the IP cam’s default value is “Off.” After registering the IP camera, set the status to “On.”

56 2003.05.21 (v 1.0) Rugged CCTV