Runco VX-6000D operation manual VX-6000d Rear Panel, RS-232C RJ-11 female connector

Controls and Functions

Figure 2-2shows the VX-6000d rear connector panel.

RETURN	ENTER	DOWN	UP	LEFT	RIGHT		MENU	RATIO	STANDBY	ON
								ASPECT
RETURN	ENTER	DOWN	UP	LEFT	RIGHT		MENU	ASPECT	STANDBY	ON
								RATIO
HDMI
HDMI
				TRIGGER		IR	OUT 232-RS
60Hz-50 240V-100 IN AC				TRIGGER		IR	RS-232 OUT

AC IN 100-240V 50-60Hz

2.2

VX-6000d Rear Panel

1 2 3 4 5 6

Figure 2-2. VX-6000d Rear Panel

1.POWER INPUT (100 to 240 VAC) Connect the VX-6000d to power here.

2.HDMI INPUT

An HDCP-compliant, digital video input for connecting the HDMI output from the DHD Controller.

3.BUILT-IN KEYPAD

Used for maintenance and troubleshooting purposes only.

4.12-VOLT (200 mA) TRIGGER OUTPUT (cylindrical, DC power supply-type jack) Connection for a retractable screen, screen masking or other, 12-volttrigger-activated equipment. Outputs +12 volts/200 mA when the projector is turned on.

5.WIRED IR (3.5-mm, mini phono jack)

Not used. To use an external infrared receiver or wired remote control with this projector, connect it to the IR input on the DHD Controller (see Figure 2-4).

6.RS-232C (RJ-11 female connector)

Connect the Display Control (RS-232) output from the DHD Controller here, using the provided communication cable.

Runco VX-6000d Installation/Operation Manual 7