Runco VX-6000D Quick Setup, 1. Installation Overview, installation specialist, Step, Procedure

Installation

Table 3-1gives a quick overview of the VX-6000d installation process. The sections following this one provide detailed instructions.

	Note		Installation should be performed by a qualified custom video
			installation specialist.
Table 3-1. Installation Overview
Step			Procedure	For Details, Refer to
				page...
1		Choose a location for the projector		20
		If installing a VX-6000d/CineWide or		26
2		VX-6000d/CineWide with AutoScope: Install AutoScope
		lens motor or fixed CineWide base plate
3		Mount the projector		31
4		Connect the DHD Controller to the projector		31
5		Connect signal sources to the DHD Controller		33
6		Connect external controller to RS-232 port (optional)		38
7		Connect 12-volt trigger outputs to AutoScope lens motor		39
		and/or other equipment (optional)
8		Connect projector, DHD Controller and lens motor (if		42
		present) to AC power and power up
9		Primary Lens adjustments: projected image size (zoom),		22, 43
		position (shift) and focus
10		For rear-screen and/or ceiling-mount installations, select		44
		the proper picture orientation
11		Install CineWide anamorphic lens (optional)		45
12		CineWide lens adjustments: position, pitch (angle),		47
		geometry and focus
		Projector calibration: adjust the following for each input;		53 through 67
		save settings when finished:
		• Aspect ratio
13		• Brightness
		• Contrast
		• Color level
		• Tint
		• Input position

3.2

Quick Setup

Runco VX-6000d Installation/Operation Manual 19