Runco VX-6000D AutoScope Lens Motor, Connecting 12-volt Trigger Outputs to External Equipment

Installation

DHD Controller: If your VX-6000d is equipped with a CineWide with AutoScope system, connect the AutoScope lens motor to a 12-volt trigger output on the DHD Controller; see Figure 3-17.

Similarly connect other 12-volt trigger-activated equipment (such as retractable screens or screen masks) to the other trigger outputs.

For more information on using the DHD Controller triggers, refer to Triggers on page 70.

AutoScope Lens Motor

Power	AC Input
Switch

3.5-mm mini plug

Connecting 12-volt

Trigger Outputs to

External Equipment

Retractable Screen or other

12-volt trigger-activatedSleeve = Ground

device

Tip = +12V

Figure 3-17. 12-volt Trigger Output Connections (from DHD Controller)

Runco VX-6000d Installation/Operation Manual 39