Runco VX-6000D operation manual Lens Replacement, 1. VX-6000d Lens Assembly Exploded View

Maintenance and Troubleshooting

5.2

Lens Replacement

Figure 5-1shows the VX-6000d lens assembly.

Motor Assembly

9/64” Hex Screw (6x) for Mounting Lens

	Motor Assembly
	Electrical Connector
Front of Lens	and Harness
Projector Front Jewelry

Figure 5-1. VX-6000d Lens Assembly Exploded View

Only trained, authorized Runco dealers should attempt to

Note remove or replace a lens. Please read this procedure carefully before doing so.

Lens replacement is normally performed at the Runco factory. Field replacement of lenses is generally only required if the projector is re-installed in a new location or the lens has been damaged.

1.Remove the Projector Front Jewelry by loosening the captive #2 Phillips screw below the lens.

74 Runco VX-6000d Installation/Operation Manual