Samsung AQ 1O0 manual Faq

FAQ

Please check the following if the USB connection malfunctions.

USB cable is not connected or it is not the supplied USB cable.

--,'.Connect the supplied USB cable.

The camera is not recognized by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager.

Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera.

There is an unexpected error during file transfer.

Turn the camera power off and on again. Transfer the file again.

......When using a USB hub.

->There may be a problem with connecting the camera to the PC through the USB hub if the PC and the hub are not compatible. Wherever possible, connect the camera to the PC directly.

Are other USB devices connected to the PC?

The camera may malfunction when it is connected to the PC at the same time as another USB device. If this

occurs, disconnect the other USB device, and connect only the camera to your PC.

When I open the Device Manager (by clicking Start

(Settings) Control Panel (Performance and Main- tenance) _ System _ (Hardware) _ Device Manager), there are Unknown Devices or Other Devices entries with a yellow question mark(?) beside them or devices with an exclamation mark(!) beside them.

Right-click the entry with the question (?) or exclamation (!) mark, and then select "Remove". Restart the PC and con- nect the camera again.

In some security programs (Norton Anti Virus, V3,

etc.), the computer may not recognize the camera as a removable disk.

Stop the security programs and connect the camera to the computer. Refer to the security program instructions about how to temporarily disable the program.

The camera is connected to the USB port located on the front of the computer.

When the camera is connected to the USB port located on the front of the computer, the computer may not recognize the camera. Connect the camera to the USB port located on the back of the computer.

101