Connecting to a Power Source

You should use the rechargeable battery BP70A supplied with the cam- era. Be sure to charge the battery before using the camera.

[] BP70A rechargeable battery Specification

BP70A

Lithium ton

740mAh

3.7V

rgi_ iApproximately 150 Minutes

[] Number of images and battery life: Using the BP70A

Using the fully charged battery,

Default settings, Program mode,

Shot to shot interval: 30Sec.

Approx. 90 MIN / Changing the zoom position between Approx. 180 shots the Wide and the Tele after every shot.

Using the flash on every second shot. Using the camera for 5 minutes and then powering it off for 1 minute.

Using the fully charged battery

Approx. 70 MIN 640x480 image size 30 fps frame rate

These figures are measured under Samsung'sstandard conditions and shooting conditions and may vary depending on the user's methods.

]important

information about

battery usage.

When

camera

is not in use, turn off the

power.

Please

remove

the battery

if the camera

will not be used

for long periods. Batteries can lose power over time and are prone to leaking if kept inside the camera.

• Low temperatures (below 0°C) can affect the performance of the battery and you may experience reduced battery life.

• Batteries wilt usually recover at normal temperatures.

• During extended use of the camera, the camera body may become warm. This is perfectly normal.

[] If you connect the AC adapter to the USB cable, you can use it as an AC cable and recharge the spare battery with it.

- Using an AC cable

_

:Connect the AC adapter to the USB cable. It can be used as a power cable.

-Using a USB cable

:Remove the AC adapter.You can download stored images to your PC (p.96) or supply the power to your camera through the USB cable.

12

Page 13
Image 13
Samsung AQ 1O0 manual Connecting to a Power Source, BP70A