PictBridge •Reset
Resets user-changed configurations.
1. Use the Up /Down button to select
the [Reset] menu tab, and then press
the Right button.
2. Use the Up /Down button to select
[Yes] or [No], and then press the OK
button.
If[Yes] is selected : All print andimage settings are reset.
If[No] isselected :Settings are notreset.
÷ Default print settings vary depending on the printer manufacturer.
Foryour printer's default settings, refer to the user'sguide that
camewith your printer.
important notes
Be sure to observe the following precautions[
• This unit contains precision electronic components. Do not use or
store this unitin the following locations.
-Areas exposed to severe changes in temperature and humidity.
-Areas exposed todust anddirt.
-Areas exposed to direct sunlight orthe inside of avehicle in hot
weather.
- Environments where thereis high magnetism orexcessive vibration.
-Areas with high explosives or highly flammable materials.
Donot leave this camera inplaces subject to dust, chemicals (like
naphthalene and mothballs), high temperature and high humidity.
Keep this camera with silica gelin a hermetically sealed boxwhen
not planning to use the camera fora long period of time
Sand can beparticularly troublesome tocameras.
- Donot let sand get insidethe camera when using it onbeaches,
coastal dunes, or other areas where there is lots ofsand.
- Doing somay result in failure or may permanently render the
camera unusable.
Handling the camera
- Neverdrop thecamera orsubject itto severe shocks or vibrations.
- Protect thelarge size LCD screen from an impact. When this
camera is notused, keep it inthe camera case.
-Avoid obstructingthe lens or the flash whenyou capture animage.
87