Method 2 : Connecting to an S-video input jack

Connect an S-video cable(not supplied) between the S- VIDEO OUT jack on DVD Recorder-VCR and S-VIDEO IN jack on the TV (or AV amplifier).

You will enjoy high quality images. S-Video separates the picture element into black and white white (Y) and color

(C) signals to present clearer images than regular video input mode.

IN

(FROM ANT.)

LINE OUT

LINE IN 1

AUDIO

AUDIO

RF

OUT

VIDEO

VIDEO

(TO TV)

INPUT

S-VIDEO

Method 3 : Connecting to Component video input jacks(Y,CB/TB,CR/PB) in 480i mode

1.Connect Component video cables(not supplied) between the COMPONENT VIDEO OUT jacks on DVD Recorder- VCR and COMPONENT VIDEO IN jacks on the TV (or AV amplifier).

2.Make sure that the disc has stopped completely before changing the mode.

If anything is not displayed on front panel display, it is 480i Mode.

IN

(FROM ANT.)

LINE OUT

LINE IN 1

AUDIO

AUDIO

RF

OUT

VIDEO

VIDEO

(TO TV)

COMPONENT

VIDEO OUT

Y

CB/PB

CR/PR

COMPONENT

Y

Pb

Pr

Connections

You will enjoy high quality accurate color reproduction. Component video separates the picture element into black and white (Y), blue (Pb) and red (Pr) signals to present most clear and clean images.

Note

Make sure that the color coded connections match.

The Y, Pb and Pr component output jacks of your

DVD Recorder-VCR must be connected to the exact corresponding component input jacks on your TV. Otherwise, red or blue images will be dis- played on the TV screen.

Make sure that the left and right audio output jacks of your DVD Recorder-VCR are connected to the left and right audio input jacks of your TV, respectively.(page 18)

English - 17

Page 17
Image 17
Samsung DVDVR300 instruction manual Method 2 Connecting to an S-video input jack