Samsung DVDVR300 VCR Setting, Select VCR, Select System, Select Tape Length, Select Auto Play

VCR Setting	3	Select “VCR”
		Using the ❷ buttons, move the selection bar to

“VCR”, then press ENTER to select.

If you want your videotapes to play automatically when you insert them, turn on Auto Play.

Note

Only tapes that are missing the Record Safety Tab

will play automatically when inserted.

System Setup

1	Open “MENU”
	With the VCR in Stop or Play mode, press the
	MENU button.
2	Select “System”
	Use the ❷ buttons to highlight “System” then

press the ENTER button.

4	Select “Tape Length”
	Press the RIGHT button to select the Tape Length.

This information is usually printed on the tape box. The menu cycles through: T-120, T-160 or T-180. Once the type of cassette is set, the VCR can display the amount of time remaining on the tape when you press the INFO. button.

		T-120
	:
	: n	T-160
:		T-180

5	Select “Auto Play”
	Move the selection bar to “Auto Play,” then press
	right button to select from the following options:
	• On - The VCR will automatically begin playing a
		video tape when it is inserted, as long as the
		safety tab of the cassette has been removed.
	• Off - Auto play is disabled.
			:
			: n	On
			:	Off

34 - English