Connections
Method 4 : Connecting to Component video input jacks(Y,CB/TB,CR/PB) in 480p mode
Your TV must support progressive scan input to allow you to watch 480p video output.
1.Connect Component video cables(not supplied) between the COMPONENT VIDEO OUT jacks on DVD Recorder- VCR and COMPONENT VIDEO IN jacks on the TV (or AV amplifier).
2.Press the Progressive button on the front panel. The mes- sage “Press “Yes” to confirm Progressive scan mode. Otherwise press “No”.” will be displayed. If you want
480P mode, select yes. If “480P” is displayed on the front panel display, now your DVD
Step 4 : Connecting the Audio Cable
There are several ways to connect your DVD
•Method 1 : Connecting to your TV
•Method 2 : Connecting to a stereo amplifier (analog audio out / digital audio out)
•Method 3 : Connecting to an AV amplifier with a digital input jack.
Manufactured under license from Dolby Laboratories. “Dolby” and the
Note
IN
(FROM ANT.)
LINE OUT | LINE IN 1 |
AUDIO | AUDIO |
RF
OUT
VIDEO | VIDEO | (TO TV) |
COMPONENT
VIDEO OUT
Y
CB/PB
CR/PR
COMPONENT
Y
Pb
Pr
Make sure that the color coded connections match.
That is, the Y, Pb and Pr component output jacks
of your DVD
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Method 1 : Connecting to your TV
This connection will use your TV’s speakers.
IN
(FROM ANT.)
LINE OUT | LINE IN 1 |
AUDIO | AUDIO |
RF
OUT
VIDEO | VIDEO | (TO TV) |
LINE OUT
R
AUDIOred
L
white
VIDEO
INPUT
R
AUDIO
red
to the exact corresponding component input jacks on your TV. Otherwise, red or blue images will be displayed on the TV screen.
Once 480p video output mode is selected, Video,
Make sure that the left and right audio output jacks of your DVD
L 
white
18 - English
