Recording the current channel you are watching

DVD-RAM DVD-RW DVD-R

1.Check the antenna cable is connected.

2.Check the remaining time of disc.

DVD-RAM/DVD-RW/DVD-R discs should be formatted in advance before beginning recording. Most new discs are sold unformatted. Make sure to format your unformatted discs before recording.

1

Press the OPEN/CLOSE button and place a record-

able disc on the disc tray.

 

 

2

Press the CHANNEL button to select

the channel you want to record.

 

4

Press the REC button.

• / is displayed on the screen and recording

 

begins.

 

 

5

Press the STOP button to stop or finish a recording

in progress.

• The message “Updating the information of disc. Please wait for a moment”.

Pausing / Resuming

Press the REC PAUSE button to pause a recording in progress.

Press the REC PAUSE button again during pause to resume recording.

You can switch channels by pressing the CH / buttons while recording pauses.

3

Press the REC Speed button on remote control, to

select the recording speed (quality).

 

• XP(High, approx. 1 hour) SP(Standard, approx.

 

 

2 hours) LP(Low, approx. 4 hours) EP(Extended

 

 

Play, approx 6 hours)

Recording

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RAM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note

You can’t change the recording mode and channel

during recording.

Recording will stop automatically if there is not

enough space for recording.

Up to 99 titles can be recorded onto a disc.

If the power interrupted due to power failure or

other reasons, the title being recorded will not be

saved onto the disc.

Recording will stop automatically if a copy protect-

ed image is input.

Do not use DVD-R authoring discs with this unit.

60 - English

Page 60
Image 60
Samsung DVDVR300 instruction manual Recording the current channel you are watching, Pausing / Resuming