Care and cleaning of the oven

Be sure all controls are OFF and all surfaces are COOL before cleaning any

WARNING

part of the range.

If your range is removed for cleaning, servicing or any reason, be sure the Anti-Tip device is re-engaged

properly when the range is replaced. Failure to take this precaution could result in tipping of the range and cause injury.

Oven vent

05

Oven vent

The oven vent is located above the right rear surface unit.

This area could become hot during oven use.

It is normal for steam to come out of the vent.

The vent is important for proper air circulation. Never block this vent.

MAINTAINING YOUR APPLIANCE

Cleaning painted parts and decorative trim

For general cleaning, use a cloth with hot and soapy water.

For more difficult residue and built-up grease, apply a liquid detergent directly onto the area and leave for 30 to 60 minutes. Wipe with a damp cloth and dry. Do not use abrasive cleaners on any of these surfaces. They can scratch.

Cleaning stainless steel surfaces

1.Shake the bottle of Stainless Steel Appliance Cleaner or polish well.

2.Place a small amount of stainless steel appliance cleaner or polish on a damp cloth or damp paper towel.

3.Clean a small area, rubbing with the grain of the stainless steel if applicable.

4.Dry and buff with a clean, dry paper towel or soft cloth.

5.Repeat as necessary.

Do not use a steel-wool pad. It will scratch the surface.

If a mineral oil-based stainless steel appliance cleaner has been used before to clean the appliance, wash the surface with dishwashing liquid and water prior to using the Stainless Steel Appliance Cleaner or polish.

Maintaining your appliance _59

Page 59
Image 59
Samsung FE-N500** user manual Care and cleaning of the oven, Oven vent, Cleaning painted parts and decorative trim