Bearing glides

4. Push the hinge locks up against the front frame of the oven cavity to the locked position.

Hinge lock

Unlocked position

Locked position

5. Close the oven door.

Removing and re-installing the warming drawer

Turn the power OFF before removing the warming drawer.

CAUTION

How to remove the warming drawer

Lever

Lever

Push down on the left guide

Pull up on the right guide

1.Open the drawer to the fully opened position.

2.Locate the glide lever on each side of the drawer. Push down on the left glide lever and pull up on the right glide lever.

3.Pull the warming drawer away from the range.

How to re-install the warming drawer

1.Pull the bearing glides to the front of the chassis glide.

2. Align the glide on each side of the drawer with

the glide slots on the range.

3. Push the drawer into the range until levers click (approximately 2 inches). Pull the

drawer open again to seat bearing glides into position. If you do not hear the levers click or

the bearing glides do not feel seated, remove

the drawer and repeat Step 1. This will minimize possible damage to the bearing glides.

64_ Maintaining your appliance

Page 64
Image 64
Samsung FE-N500** user manual Removing and re-installing the warming drawer, How to remove the warming drawer