Scanning and Connecting to a Wi-Fi Network

When you turn on Wi-Fi, your device searches for available Wi-Fi connections, then displays them on screen.

1.From the Home screen, touch Apps Settings.

Under Wireless and networks, touch Wi-Fi to turn this service on.

2.Touch Wi-Fito display available networks.

3.Your device automatically scans for nearby Wi-Fi networks and displays them. Touch a Wi-Fi network to connect.

4.If the Wi-Fi network is open, you will be automatically connected. If the Wi-Fi network is secured, enter the password at the prompt to connect.

Adding a Wi-Fi Network Manually

1.From the Home screen, touch Apps Settings.

Under Wireless and networks, touch Wi-Fi to turn this service on.

2.Your device automatically scans for nearby Wi-Fi networks and displays them.

3.Below the list of networks, touch Add Wi-Fi network, then enter these fields:

Network SSID: Enter the name of the Wi-Fi Wireless Access Point.

Security: Select the type of security used by the WAP.

If Security is None, continue to set the Proxy settings (optional) and IP settings (optional).

If Security is WEP, WPA/WPA2 PSK, or 802.1x EAP, enter the Password and continue to set the Proxy settings (optional) and IP settings (optional).

63

Page 68
Image 68
Samsung GH68-38783A user manual Scanning and Connecting to a Wi-Fi Network, Adding a Wi-Fi Network Manually