Nothing displays

Check that the battery has been charged and installed correctly.

Check that the phone has been turned on (PWR key pressed for more than one second).

You have entered a phone number, but the phone is not dialing it.

Have you pressed the SEND button?

Is the cellular phone service currently available (SVC displayed)?

Are you accessing the right cellular network (if the phone is programmed for dual network use)?

Your party cannot reach you.

Is your phone turned on (PWR key pressed for more than one second)?

Are you accessing the right cellular network (if the phone is programmed for dual network use)?

Your party cannot hear you speaking.

Have you turned off the microphone (MUTE displayed)?

Are you holding the phone close enough to your mouth? The microphone is located at the bottom of the phone.

The phone starts beeping, and flashes on the screen.

The battery is insufficiently charged. Replace the battery, and recharge it fully until the lamp on the charger turns green.

The audio quality of the call is poor.

Check the signal strength indicator ( ) on the screen; the number of bars indicates the signal strength from weak ( ) to

strong ( ).

Try extending the antenna, moving the phone slightly, or moving closer to a window if you are in a building.

No number is dialed when you recall a memory location.

Check that the numbers have been stored correctly by using the memory scan feature. (See page 32.)

Re-store them in the memory, if necessary.

If the above guidelines do not enable you to solve the problem, make a note of:

The model and serial numbers of your phone

Your warranty details

A clear description of the problem

Then contact your local dealer or a SAMSUNG Authorized Service Center.

Miscell aneous

86

87

Miscell aneous

Page 44
Image 44
Samsung GH68-60614A owner manual Nothing displays, Your party cannot reach you, Your party cannot hear you speaking