
Your New Wide TV
Rear Panel Jacks
ŒCableCARDTM
Insert a CableCARD into the slot. (Refer to page 22)
´
Connects an
ˇVIDEO/AUDIO INPUT jacks
Connect video/audio signals from external sources, such as VCR or DVD players. (Refer to pages 21 and 25)
¨VIDEO/AUDIO OUTPUT jacks
Sends video/audio signals from the TV to an external source, such as a VCR. These jacks are available only in TV, Video and
ˆCOMPONENT IN 1, 2 jacks (Y, PB, PR, AUDIO L/R) Use these jacks to connect the component video/audio signals from a DVD player or a
ØPC VIDEO INPUT jack
Connect to the video output jack on your PC.
∏PC AUDIO INPUT jack
Connect to the audio output jack on your PC. (Refer to page 132)
”HDMI (High Definition Multimedia Interface) INPUT jacks (HDMI IN 2)
Connect to the HDMI jack of a device with HDMI output.
’HDMI (High Definition Multimedia Interface)/ DVI INPUT jack (HDMI 1/DVI IN)
Connect to the HDMI jack of a device with HDMI output.
These inputs can also be used as a DVI connection with separate analog audio inputs. An optional HDMI/DVI cable will be necessary to make this connection. When using an optional HDMI/DVI adapter, the DVI analog audio inputs on your TV allow you to receive left and right audio from your DVI device.
(Not compatible with PC) (Refer to pages 24 and 27)
˝DVI AUDIO (L/R) IN
Connect to the DVI audio output jack of an external device. (Refer to page 26)
ÔDIGITAL AUDIO OUT (OPTICAL) jack
Connect to a Digital Audio Component. (Refer to page 28)
G-LINKTM
Connect the IR controller cable to the
ÒRS232C
Connection for professional linking network and service usage.
ÚD-Net (IEEE1394) S400 MPEG
Connect to external IEEE1394 digital products such as digital VCRs and camcorders. Two jacks are provided for this purpose, which allow for a high degree of flexibility for connecting your
ÆANTENNA terminals
Two independent cables or antennas can be connected to
these terminals. Use “ANT 1 IN (CABLE)” and “ANT 2 IN (AIR)” terminals to receive a signal from VHF/UHF antennas or your cable system. (Refer to pages 18~20)
ıPOWER IN
Connect the supplied power cord.
English - 14